Optimization of the parameters of the sewing thread cutting process

Authors

  • Yuri V Novikov Vitebsk State Technological University, Belarus
  • Stas Krasner Vitebsk State Technological University, Belarus

DOI:

https://doi.org/10.29114/ajtuv.vol4.iss1.168

Keywords:

cutting of sewing threads, movable knife blade, properties of threads, offset of knives, cutting processes, thread trimming in sewing machines

Abstract

Sewing thread cutting processes are widely used in semi-automatic machines of the garment industry, and is an urgent problem. There is no scientifically based methodology for designing thread trimming mechanisms for semi-automatic sewing machines.

Cutting threads by the method of scissors does not provide complete cutting of all components of the thread in case of insufficient pressing of the knife planes to each other. To ensure complete trimming, a design cutting scheme has been developed and calculation formulas have been obtained for determining the force exerted by the thread on the movable knife, taking into account the mechanical characteristics of the cut sewing thread.

Downloads

Download data is not yet available.

References

<p>Kapustin, I.I. (1950). Cutting and cutting tools: a textbook for universities. I.I. Kapustin. - Moscow: Gizlegprom, 377 p.</p>
<p>Kapustin, I.I. (1966). Automatic machines and automatic lines in the sewing and shoe production: textbook for universities. II. Kapustin, I.I. Galynker. - Minsk: Light industry, 422 p.</p>
<p>&nbsp;Valshchikov, N.M. (1973). Calculation and design of sewing machines. N.M. Valschikov, B.A. Zaitsev, Yu.N. Fellers. - Leningrad: Mechanical Engineering, 344 p.</p>
<p>&nbsp;Komissarov, A.I. (1978). Design and calculation of machines for shoe and sewing industries. A.I. Komissarov [et al.], under the editorship of A.I. Komissarova. - Moscow: Engineering, 431 p.</p>
<p>&nbsp;Zak, I.S. (1977). Adaptations and aggregate units for sewing machines. I.S. Zach &ndash;Moscow: Light industry.</p>
<p>&nbsp;Garbaruk, V.P. (1977). Calculation and design of the main mechanisms of shuttle sewing machines.&nbsp; V.N. Garbaruk. - Leningrad: Mechanical Engineering, 232 p.</p>
<p>&nbsp;Polukhin, V.P. (1972). Design of the mechanisms of sewing and basting machines. V.P. Polukhin. - Moscow: Engineering, 280 p.</p>
<p>&nbsp;Arkhipov, N.N. (1983). Fundamentals of the design and calculation of typical machines and apparatuses of light industry: a textbook for universities. NN. Arkhipov [et al.]. - Moscow: Mashgiz, 599 p.</p>
<p>&nbsp;Polukhin, V.P. (1970). Methods and means of automatic thread trimming on sewing machines. V.P. Polukhin, V.N. Sokolov, V.A. Uymanov. - Moscow: TSNIITEIlegpishchemash, 76 p.</p>
<p>&nbsp;Kuzmin A.V. (1982). Course design of machine parts: a reference guide. Part 1. A.V. Kuzmin [et al.]. - Minsk: Higher School, 208 p.</p>
<p>&nbsp;Artobolevsky, I.I. (1965). Theory of mechanisms. I.I. Artobolevsky. - Moscow: Science. S. 764-769.</p>
<p>&nbsp; Kapustin, I.I. (1980). Cutting and cutting tools. I.I. Kapustin. - Moscow: Light Industry, 191 p.</p>
<p>&nbsp;Yascheritsyn, P.I. (1985). Planning an experiment in mechanical engineering. PI. Yascheritsyn, E.I. Maharinsky. - Minsk: Higher school, 286 p.</p>
<p>&nbsp;Tikhomirov, V.B. (1974). Planning and analysis of the experiment (when conducting research in the light and textile industries). V.B Tikhomirov. - Moscow: Light Industry, 262 p.</p>
<p>&nbsp;Vinogradov, Yu.S. (1970). Mathematical statistics and its application in the textile industry. Yu.S. Vinogradov. - Moscow: Light Industry, 312 p.</p>

Downloads

Published

2020-06-30

How to Cite

Novikov, Y. V., & Krasner, S. (2020). Optimization of the parameters of the sewing thread cutting process. ANNUAL JOURNAL OF TECHNICAL UNIVERSITY OF VARNA, BULGARIA, 4(1), 55–66. https://doi.org/10.29114/ajtuv.vol4.iss1.168

Issue

Vol. 4 No. 1 (2020): Annual Journal of Technical University of Varna

Section

MECHANICS, MATERIALS AND MECHANICAL ENGINEERING

License

            PUBLICATION AGREEMENT

           Annual Journal of Technical university of Varna (AJTUV) aims to guarantee that original material is published while at the same time giving significant freedom to our authors. For that matter, we uphold a flexible copyright policy meaning that there is no transfer of copyright to the publisher and authors retain exclusive copyright to their work.

           When submitting a manuscript the Corresponding Author is required to accept the terms and conditions set forth in our Publication Agreement as follows:

            CORRESPONDING AUTHOR'S GRANT OF RIGHTS
            The Corresponding Author grants to AJTUV, during the full term of copyright and any extensions or renewals of that term the following:
      • An irrevocable non-exclusive right to publish, reproduce, republish, transmit, distribute and otherwise use the Work in electronic and print editions of the publication and in derivative works throughout the world, in all languages, and in all media now known or later developed.
      • An irrevocable non-exclusive right to create and store electronic archival copies of the Work, including the right to deposit the Work in open access digital repositories.
      • An irrevocable non-exclusive right to license others to reproduce, translate, republish, transmit and distribute the Work under the condition that the Authors are attributed (Currently this is carried out by publishing the Work under a Creative Commons Attribution 4.0 Unported License).
           Copyright in the Work remains with the Authors. Authors retain patent, trademark and other intellectual property rights.

           CORRESPONDING AUTHOR'S DUTIES
           When distributing or re-publishing the Work, the Corresponding Author agrees to credit the AJTUV in which the Work is published as the source of first publication. Corresponding Author warrants that Co-authors will also credit the AJTUV in which the Work is published as the source of first publication when they are distributing or re-publishing the Work. 

           CORRESPONDING AUTHOR'S WARRANTY
           The Corresponding Author represents and warrants that the Work does not violate or infringe the law or the rights of any third party and, specifically, that the Work contains no matter that is defamatory or that infringes any literary or proprietary rights, intellectual property rights, or any rights of privacy. The Corresponding Author warrants that the Work is original, has not been formally published in any other peer-reviewed journal or in a book or edited collection, and is not under consideration for any such publication. The Corresponding Author also warrants that he or she has the full power to make this agreement. If the Work was prepared jointly the Corresponding Author warrants that all Co-authors consent to the submission and publication of the Work.

            The Corresponding Author agrees to hold AJTUV harmless from any breach of the aforestated representations and warranties.

           AJTUV DUTIES AND RIGHTS
AJTUV agrees to publish the Work attributing it to its Authors. AJTUV is granted the authority to enforce the rights from this agreement, on behalf of the authors, against third parties (for example in cases of plagiarism or copyright infringements).

           AJTUV's Privacy Statement
       The names and email addresses entered in the AJTUV website will be used only and exclusively for the stated purposes of this annual journal and will not be made available for any other purpose or to any other party.
       All personal information supplied will remain within publisher and will not be shared with any external entity unless prior permission is given.
       Your personal information will not be sold, distributed or published in any manner whatsoever.