Principle of work in the process of digitization and reconstruction of model of belt buckle by photogrammetry and 3D computer design

Authors

  • Momchil Todorov Tachev Technical University of Varna, Department of Industrial Design, 9010, 1 Studentska Street, Varna, Bulgaria
  • Tihomir Atanassov Dovramadjiev Technical University of Varna, Department of Industrial Design, 9010, 1 Studentska Street, Varna, Bulgaria
  • Ginka Velikova Jecheva Technical University of Varna, Department of Industrial Design, 9010, 1 Studentska Street, Varna, Bulgaria
  • Kremena Cankova Markova Technical University of Varna, Department of Industrial Design, 9010, 1 Studentska Street, Varna, Bulgaria

DOI:

https://doi.org/10.29114/ajtuv.vol2.iss2.93

Keywords:

Culture, history, digitization, photogrammetry, 3D

Abstract

Bulgarian female folk costume is rich in multiple characters, elements and details. One of the most characteristic is the belt buckles. As well as specially designed symbolism, the belt buckle - with their unique identity belong to the national - historical heritage of Bulgaria. In the present study a model of a belt buckle is digitized and reconstructed, and possessing grace and beauty. The realization of the completed three-dimensional computer model goes through stages of photogrammetry and computer design with special sculpting tools.

Downloads

Download data is not yet available.

References

<p>Dimitrov, P. (2012). Metal decorations from Veliki Preslav. BULGARIAN E-JOURNAL OF ARCHAEOLOGY, 2(2), 93-121.</p>
<p>Dovramadjiev T. (2017). 3D computer processing and improvement of the geometry of received photogrammetric models through photo shooting with one camera. Proceedings of ISCAME 2017, 12-13 October, 2017 Debrecen, Hungary. ISBN 978-963-473-304-1. p. 115 - 122.</p>
<p>Georgieva I. (1993). Bulgarian National Mythology. II Edition. Science and Art, Sofia, ISBN 954-02&mdash;0077-6.</p>
<p>Kaufman, J., Rennie, A. E., &amp; Clement, M. (2015). Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artifacts. Procedia CIRP, 36, 223-229. <br/><a href="https://doi.org/10.1016/j.procir.2015.01.073" target="_blank" rel="noopener">Crossref</a></p>
<p>Laakso A. (2016). From reality to 3D model. Post production of photogrammetry-based model. LAHTI UNIVERSITY OF APPLIED SCIENCES. a. p. 108</p>
<p>Lobanov A. N. (1984). Photogrammetry. II Edition. Nedra, Moscow. UDK 528.7&rsquo;(075.8)</p>
<p>Nazarov A. S. (2006). Photogrammetry.TetraSystems. Russia. UDK 528.711.18 (075.8), BBK 26.12i73; ISBN 985-470-402-5</p>
<p>Obiralov A. I., Limonov A. N., Gavrilova L. A. (2002). Photogrammetry.Koloss.Moscow. UDK 528.7(075.32); ISBN 5-95232-0025-0</p>
<p>Schenk T. (2005). Introduction to Photogrammetry. Autumn Quarter. Department of Civil and Environmental Engineering and Geodetic Science The Ohio State University. GS400.02.</p>
<p>Sirakov N., Demirev V., Ilieva D., Ivanov I. (2014). The Nakit. Regional Historical Museum of Sliven (RIM &ndash; Sliven). Museum of NBU (New Bulgarian University). Sofia, ISBN 978-954-535-638-5.</p>
<p>Tachev M. (2012). Role of the applied arts in preserving the slavonicidentidy and Bulgarian national idea at the beginning of XX-th century. Work and materials. Moscow, MGU, 21-24.3.2012; ISBN 978-5-211-06356-3</p>
<p>Waas М., Zell D. (2014). Practical 3D photogrammetry for the conservation and documentation of Cultural Heritage.Museen der Stadt Wien &ndash; Stadtarch&auml;ologie. Proceedings of the 18th International Conference on Cultural Heritage and New Technologies - 2013. ISBN 978-3-200-03676-5.</p>

Downloads

Published

2018-12-20

How to Cite

Tachev, M. T., Dovramadjiev, T. A., Jecheva, G. V., & Markova, K. C. (2018). Principle of work in the process of digitization and reconstruction of model of belt buckle by photogrammetry and 3D computer design. ANNUAL JOURNAL OF TECHNICAL UNIVERSITY OF VARNA, BULGARIA, 2(2), 54–61. https://doi.org/10.29114/ajtuv.vol2.iss2.93

Issue

Vol. 2 No. 2 (2018): Annual Journal of Technical University of Varna

Section

GENERAL ENGINEERING

License

            PUBLICATION AGREEMENT

           Annual Journal of Technical university of Varna (AJTUV) aims to guarantee that original material is published while at the same time giving significant freedom to our authors. For that matter, we uphold a flexible copyright policy meaning that there is no transfer of copyright to the publisher and authors retain exclusive copyright to their work.

           When submitting a manuscript the Corresponding Author is required to accept the terms and conditions set forth in our Publication Agreement as follows:

            CORRESPONDING AUTHOR'S GRANT OF RIGHTS
            The Corresponding Author grants to AJTUV, during the full term of copyright and any extensions or renewals of that term the following:
      • An irrevocable non-exclusive right to publish, reproduce, republish, transmit, distribute and otherwise use the Work in electronic and print editions of the publication and in derivative works throughout the world, in all languages, and in all media now known or later developed.
      • An irrevocable non-exclusive right to create and store electronic archival copies of the Work, including the right to deposit the Work in open access digital repositories.
      • An irrevocable non-exclusive right to license others to reproduce, translate, republish, transmit and distribute the Work under the condition that the Authors are attributed (Currently this is carried out by publishing the Work under a Creative Commons Attribution 4.0 Unported License).
           Copyright in the Work remains with the Authors. Authors retain patent, trademark and other intellectual property rights.

           CORRESPONDING AUTHOR'S DUTIES
           When distributing or re-publishing the Work, the Corresponding Author agrees to credit the AJTUV in which the Work is published as the source of first publication. Corresponding Author warrants that Co-authors will also credit the AJTUV in which the Work is published as the source of first publication when they are distributing or re-publishing the Work. 

           CORRESPONDING AUTHOR'S WARRANTY
           The Corresponding Author represents and warrants that the Work does not violate or infringe the law or the rights of any third party and, specifically, that the Work contains no matter that is defamatory or that infringes any literary or proprietary rights, intellectual property rights, or any rights of privacy. The Corresponding Author warrants that the Work is original, has not been formally published in any other peer-reviewed journal or in a book or edited collection, and is not under consideration for any such publication. The Corresponding Author also warrants that he or she has the full power to make this agreement. If the Work was prepared jointly the Corresponding Author warrants that all Co-authors consent to the submission and publication of the Work.

            The Corresponding Author agrees to hold AJTUV harmless from any breach of the aforestated representations and warranties.

           AJTUV DUTIES AND RIGHTS
AJTUV agrees to publish the Work attributing it to its Authors. AJTUV is granted the authority to enforce the rights from this agreement, on behalf of the authors, against third parties (for example in cases of plagiarism or copyright infringements).

           AJTUV's Privacy Statement
       The names and email addresses entered in the AJTUV website will be used only and exclusively for the stated purposes of this annual journal and will not be made available for any other purpose or to any other party.
       All personal information supplied will remain within publisher and will not be shared with any external entity unless prior permission is given.
       Your personal information will not be sold, distributed or published in any manner whatsoever.