Mathematical model of the heat interaction between the metal matrix and the reinforcement phase during the production of Metal Matrix Composites

Authors

  • Daniela Todorova Spasova Technical university of Varna
  • Krastin Krasimirov Yordanov Technical University of Varna

DOI:

https://doi.org/10.29114/ajtuv.vol2.iss1.61

Keywords:

mathematical model, MATLAB FEA, finite elements, casting process simulation, MMCs

Abstract

This present paper is relevant to the establishment on mathematical model of the heat interaction between the metal matrix (liquid phase- Cu) and a reinforcement (solid- Fe) phase, during the production of the Metal Matrix Composites (MMCs) by the method of capillary molding. In this case is substituted heat object with a mathematical model drawn up and grounded to investigation of the original behavior and properties, clarifies temperature fields in bodies.

The established simulation clarifies temperature fields and the causal liaison between the metal matrix and the reinforcement phase in the formation of the macro and microstructure at the time of production of MMCs. Casting process simulation is an approved method for the optimization of the methods of casting technology. The basic opportunities, ideology and structure of the software "MATLAB FEA" are introduced to simulate casting technology. The possibilities of the product are illustrated by the results obtained from a computer simulation by the technical process of the production of MMCs.

Downloads

Download data is not yet available.

References

<p>Зиновьев, В. Е. (1989). Теплофизические свойства металлов при высоких температурах. Справочник. Металлургия., с.34 (Russian)<br /> <br />Марков И. "Метод на крайните елементи", София 2014 &ndash; с. 67-69 (in Bulgarian)<br /> <br />Марков, К. З. (2002). Математическо моделиране. Университетско издателство" Св. Кли-мент Охридски", с. 43-44. (in Bulgarian)<br /> <br />Радев Р.Й., Спасова Д.Т., Атанасов Н.М., Иванова Р.И., (2010)., "Метод з изработване на леярски форми" Патент BG 65955 B1 (in Bulgarian)<br /> <br />Шубина, М. В., Вдовин, К. Н., Девятов, Д. Х., &amp; Гималетдинов, Р. Х. (2011). Математическое моделирование процесса формирования отливки с учетом фазовых превращений и диффузионных явлений. Теория и технология металлургического производства, (11). (in Russian)<br /> <br />Daniel B., John R., 1976 "Diffusion in Copper and Copper Alloys Part IV. Diffusion in Systems Involving Elemenst of Group VIII", Metallurgy Division, Institute for Materials Re-search, National Bureau of Standards, Washington, p. 1321<br /> <br />Butrymowicz, D. B., Manning, J. R., &amp; Read, M. E. (1976). Diffusion in copper and copper al-loys part IV. Diffusion in systems involving elements of group VIII. Journal of Physical and Chemical Reference Data, 5(1), 103&ndash;200.&nbsp;<br /><a href="https://doi.org/10.1063/1.555528" target="_blank" rel="noopener">Crossref</a><br /> <br />Geslin, P.-A., McCue, I., Gaskey, B., Erlebacher, J., &amp; Karma, A. (2015). Topology-generating interfacial pattern formation during liquid metal dealloying. Nature Communications, 6(1).&nbsp;<br /><a href="https://doi.org/10.1038/ncomms9887" target="_blank" rel="noopener">Crossref</a><br /> <br />Klein, S., Weber, S. &amp; Theisen, W. J Mater Sci (2015) 50: 3586.&nbsp;<br /><a href="https://doi.org/10.1007/s10853-015-8919-y" target="_blank" rel="noopener">Crossref</a><br /> <br />Markov I., 2002 "Computer Implementation of Equivalent Nodal Forces for Timoshenko Plane Frame Element", 1'Universite d'Architecture, de Genie Civil et de Geodesie- Sofia, vol. XL, fasc. VI, p.174-176.<br /> <br />Wang, H., Xu, Y., Shimono, M., Tanaka, Y., &amp; Yamazaki, M. (2007). Computation of Interfa-cial Thermal Resistance by Phonon Diffuse Mismatch Model. MATERIALS TRANSACTIONS, 48(9), 2349&ndash;2352.&nbsp;<br /><a href="https://doi.org/10.2320/matertrans.MAW200717" target="_blank" rel="noopener">Crossref</a></p>

Downloads

Published

2018-06-30

How to Cite

Spasova, D. T., & Yordanov, K. K. (2018). Mathematical model of the heat interaction between the metal matrix and the reinforcement phase during the production of Metal Matrix Composites. ANNUAL JOURNAL OF TECHNICAL UNIVERSITY OF VARNA, BULGARIA, 2(1), 1–8. https://doi.org/10.29114/ajtuv.vol2.iss1.61

Issue

Vol. 2 No. 1 (2018): Annual Journal of Technical University of Varna

Section

MECHANICS, MATERIALS AND MECHANICAL ENGINEERING

License

            PUBLICATION AGREEMENT

           Annual Journal of Technical university of Varna (AJTUV) aims to guarantee that original material is published while at the same time giving significant freedom to our authors. For that matter, we uphold a flexible copyright policy meaning that there is no transfer of copyright to the publisher and authors retain exclusive copyright to their work.

           When submitting a manuscript the Corresponding Author is required to accept the terms and conditions set forth in our Publication Agreement as follows:

            CORRESPONDING AUTHOR'S GRANT OF RIGHTS
            The Corresponding Author grants to AJTUV, during the full term of copyright and any extensions or renewals of that term the following:
      • An irrevocable non-exclusive right to publish, reproduce, republish, transmit, distribute and otherwise use the Work in electronic and print editions of the publication and in derivative works throughout the world, in all languages, and in all media now known or later developed.
      • An irrevocable non-exclusive right to create and store electronic archival copies of the Work, including the right to deposit the Work in open access digital repositories.
      • An irrevocable non-exclusive right to license others to reproduce, translate, republish, transmit and distribute the Work under the condition that the Authors are attributed (Currently this is carried out by publishing the Work under a Creative Commons Attribution 4.0 Unported License).
           Copyright in the Work remains with the Authors. Authors retain patent, trademark and other intellectual property rights.

           CORRESPONDING AUTHOR'S DUTIES
           When distributing or re-publishing the Work, the Corresponding Author agrees to credit the AJTUV in which the Work is published as the source of first publication. Corresponding Author warrants that Co-authors will also credit the AJTUV in which the Work is published as the source of first publication when they are distributing or re-publishing the Work. 

           CORRESPONDING AUTHOR'S WARRANTY
           The Corresponding Author represents and warrants that the Work does not violate or infringe the law or the rights of any third party and, specifically, that the Work contains no matter that is defamatory or that infringes any literary or proprietary rights, intellectual property rights, or any rights of privacy. The Corresponding Author warrants that the Work is original, has not been formally published in any other peer-reviewed journal or in a book or edited collection, and is not under consideration for any such publication. The Corresponding Author also warrants that he or she has the full power to make this agreement. If the Work was prepared jointly the Corresponding Author warrants that all Co-authors consent to the submission and publication of the Work.

            The Corresponding Author agrees to hold AJTUV harmless from any breach of the aforestated representations and warranties.

           AJTUV DUTIES AND RIGHTS
AJTUV agrees to publish the Work attributing it to its Authors. AJTUV is granted the authority to enforce the rights from this agreement, on behalf of the authors, against third parties (for example in cases of plagiarism or copyright infringements).

           AJTUV's Privacy Statement
       The names and email addresses entered in the AJTUV website will be used only and exclusively for the stated purposes of this annual journal and will not be made available for any other purpose or to any other party.
       All personal information supplied will remain within publisher and will not be shared with any external entity unless prior permission is given.
       Your personal information will not be sold, distributed or published in any manner whatsoever.